Durability:
Clear Coat is durable for up to 12 months when maintained correctly, with an average of 5000 miles.
Specification:
- Chemical Resistant
- Ultra Hydrophobic (water and dirt repellant)
- 6 Hour Cure Time (before getting wet)
- Cost-effective (up to 25 cars or 25 coats)
- Suitable for outdoor application
Features:
- Fast, Easy Application
- Gloss boosting on Gloss finishes
- Enhancing the finish of Satin and Matte finishes
- Suitable on Paint, Wheels, Glass and Plastic Trim
- Apply on PPF, Vinyl, Carbon and Composite
- Easy to apply, ceramic coating-like results
Directions:
- Apply one spray onto your favourite ceramic coating applicator
- Coat one panel in straight overlapping lines.
- Ensure the coating is spread evenly across the whole panel.
- Remove excess immediately (10-20 seconds) with one of our Panel Wipe Microfibre Cloths.
- Repeat the process for maximum durability.
- Any residue or smearing can be removed by re-application, simply re-apply to the area & wipe off.
- Apply in temperatures above 5 degrees celsius, in a well-ventilated area.
Hints & Tips:
- If you find Clear Coat cures too fast, split larger sections like bonnets & roofs into sections (halves or quarters)
- If applying outside, stand with your back to the wind, spray away from the car, and spray into the speed applicator.
- Use a two full sprays to prime the applicator initially, then just one spray per panel.
- Hard to remove? You may be applying too much, a little goes a long way, ensure you are using a close loop microfibre (not plush)
- Missed a bit? You can top up at any time, just make sure the panel is clean & free from dust & dirt.
- Found a smear? Any residue or smearing can be removed by re-application, simply re-apply to the area & wipe off.
- Waxes are best to be removed before application, ideally you want Clear Coat to bond directly to the surface, or on-top of full ceramic coatings.
Bottle Size: 250ml