IK Sprayers are specifically manufactured for the generation of dry and long-lasting foam. Designed for use with chemical agents with surfactant properties (surface active).
- Safety lock
- Safety valve with depressurisation option
- Parking for the Lance
- Content Identification System
- Pump Fastening System During Filling
- Stable Base with Feet Brackets
- Compressed Air Socket
- Translucent Tank with Level Indicator
CallumW (verified owner) –
Everything I needed it to be.
Just need to make sure the hoses are done up tight or foam will start oozing out where it shouldn’t.
I used a 1:40 ratio (= 25ml product per 1L water) with the grey tube and 1 cotton filter and it worked well. I might experiment with 2 cotton filters to see if there’s much difference.
For reference, 1L solution is plenty for a motorbike. 3L will easily cover a mid-size car + deep wheel wash with about 500ml left over.
I used Gtechniq Citrus Foam which was .. ok.
Might try Bilt Hamber or Gyeon foam next to see if they’re better at pulling dirt off the car before the contact wash.
Asa (verified owner) –
Used this to replace having to being out the pressure washer everytime to foam the car.
Quick and easy to set up. I used a foot pump on the sprayer.
When fully pumped up, I could easily coat my car without having to pump it again. Simply for ease of use and access I would recommend this for anyone who wants to foam their car but not set up a pressure washer.