Ultra foam has been formulated to be a concentrated ultra high foam additive that will produce an extremely stable and dense foam when used through a heavy duty foam lance. With a light grape scent, this product is extremely pleasant to work with and the stable foam produced will linger for up to and over 25 minutes meaning that there is no more rushing arount to clean wheels, badges or door shuts like before whilst the foam is dwelling. By using ultra foam as a foam prewash the risk of swirl marks and scratches when washing the car is dramatically reduced.
Ultra foam has been primarily formulated to be used in a foam lance,with an end dilution rate of 100:1. This equates to roughly 1-2″ in the bottom of a 1l bottle in a foam lance when using with a domestic pressure washer.
To use simply rinses excess durt from the car first, then spray the car with a liberal layer of foam and allow to dwell for at least 10 minutes, after this time simply rinse the foam off and the dirt rinse away too. The longer this product dwells the deeper it penetrates into the dirt and more of the dirt will be removed.
Ultra foam can also be used in place of a regular car shampoo. Simply add 10ml to your bucket of water and wash as normal
- Rinse the car thoroughly with water
- Prepare a bucket of water and squeeze in 1″ of ultra foam at the bottom of the lance and top up with water
- Use a wool mitt to clean the car with the foam or spray foam using foam lance
- Rinse well with water
Keep product out of reach from children. Wear suitable gloves. If comes into contact with skin, rinse well with water. If it comes in contact with eyes, rinse immediately and seek medical advice. Do not drink! If swallowed, consult a doctor immediately and show the product container and label.