TAC System Top Coat 2.0 50ml


Out of stock

Want to be notified when this product is back in stock?

Free delivery over £30 (UK Mainland) or £50 (Highlands & Islands) | 30 Day Return Policy
Further Delivery Information



Top Coat 2.0 is an upgrade to Top Coat 1.0. Application results in even more depth, hydrophobics, gloss and is absolutely easy to apply on all exterior vehicle surfaces.  Top Coat is compatible with any TAC System Quartz coatings, works impressively well as a standalone coating too. Superior gloss with insane hydrophobic properties to paint, allowing for extreme ease of vehicle maintenance.

Durability/Product Specs: 1 year – 1 layer. Contains 40% total concentration of Si02 and Nano Diamond technology for a more stable formula resulting in a more durable finish.

Common Uses: Stand alone LSP for painted surfaces, or as a topper to TAC System coatings after full curing.

Warnings: Always wear respirator & gloves. Ensure application area is free of loose contamination.

Directions: Applicator Limit = Hood size section. Max Dwell time 3 minutes, wipe off 1-3 minutes. (suggested application: 2 panels at a time)
1] Clean and dry all exterior vehicle surfaces thoroughly. Apply out of direct sun to cool vehicle panels.
2] With a dedicated MF suede or MF applicator pad, apply a small amount of Top Coat 2.0 to the applicator then begin to work it in, one to two panels at a time. It spreads out very well… a little goes a long way.
3] Once applied allow Top Coat 2.0 to dwell for 1-3 minutes, then using a clean soft MF towel, buff the surface until all excess product is removed.

Post Application Instructions: For Best Result, Top Coat 2.0 requires 24 hours of cure time before water exposure.

Tips / Alternate Uses:  Top Coat 2.0 can also be topped off with Quartz Max.

TAC System Top Coat 2


There are no reviews yet.

Be the first to review “TAC System Top Coat 2.0 50ml”

Your email address will not be published. Required fields are marked *