Looking for a microfibre pad with extra cutting power? Then use the Moore Extra Cut Microfibre, the must-have pad for the harder paints!
The Moore Microfibre Extra cut is a pad you need for maximum cutting power. Use this pad when a standard cutting pad falls short. Perfect pad in combination with a heavy cutting compound. A good corrective pad also for the harder paints!
The Moore microfibre pads are made of very fine microfibre based on polyurethane foam. This innovative pad can replace traditional foam polishing pads. The extra cut can even replace the traditional wool! Because of the short fibre of the extra cut this pad has just a bit more bite on the harder paints!
Because of the microfibre, this pad is much more effective than its predecessor. Will remove scratches faster without removing too much paint.
The 80-135 and 160 mm have a centre hole. This provides extra cooling during polishing and ensures that the pad can not get too hot. This also helps minimize the imploding of the pad
For best results and for longer tool life, clean this pad with warm water and rinse with an air sprayer.
- Fast results
- Good bonding
- Use on DA and rotary
- Suitable for machines with a large rash
- Extra cutting (short pile) microfiber
- Cutting Microfiber
- Finishing Microfiber
- 30 mm
- 55 mm
- 80 mm
- 135 mm
- 160 mm