GYEON Q2 Synchro 50ml Kit

£92.00 Incl. VAT

In stock

Fast delivery from £3.95 | Free over £30 (UK Mainland)
Next Day Available | 30 Day Return Policy
Further Delivery Information
  • MasterCard
  • Visa
  • Maestro
  • PayPal
Category:

Description

Gyeon Q² Syncro is a state of the art quartz coating system that simultaneously protects and enhances the appearance of automotive paint. It achieves this through the use of two distinct products that are supplied as a kit; Gyeon Q² Mohs and Gyeon Q² Skin. The former uses the latest in low volatile content silicon (Si) technology to lay down a hybrid film of perhydropolysilazane (PHPS), hydroxyl-rich organic copolymers, and poly(methyl methacrylate) (PMMA) that condenses rapidly to form an amorphous organic-silica nano-composite that chemically bonds to painted surfaces at the molecular level. Unlike rival products, Gyeon Q² Mohs actually gains molecular weight as it cures (as skeletal Si-N bonds are replaced with Si-O bonds), which improves its structural integrity and restricts its shrinkage to 5% during the curing process (the average figure for SiO2 coatings is 30%). As a result, each coat of Gyeon Q² Mohs imparts a measurable 0.2 micron increase in total paint thickness, and significantly improves the scratch resistance of the underlying finish; on average, each coat adds two grades of hardness (2H) on the pencil hardness scale.

The second product in the system, Gyeon Q² Skin, is a silicone-based topcoat. As a result of comprising a high proportion of organic components (hydrocarbons), this sacrificial topcoat subtly alters the look of the Gyeon Q² Mohs finish (by adding richness and gloss) and modifies its behaviour with respect to water. Whereas surfaces treated with Gyeon Q² Mohs become naturally water-hating (hydrophobic), the addition of Gyeon Q² Skin increases their slickness greatly, which causes rainfall and rinse water to bead up and sheet off even more quickly. This not only enhances the notable self-cleaning effect for which Gyeon Q² Mohs is famed but also serves to reduce the risk of water spots forming during the first few weeks following application. Gyeon Q² Syncro is currently supplied as a pre-packed kit containing either a 50 ml or 100 ml bottle of Gyeon Q² Mohs, either a 30 ml or 50 ml bottle of Gyeon Q² Skin, a 100 ml bottle of Gyeon Q²M Cure, a Gyeon Q²M Applicator Block, eight Gyeon Q²M Applicator Suedes and an instruction booklet.

Directions

You should apply Gyeon Q² Syncro in a dry place out of direct sunlight. In all cases, prepare the surfaces you are going to treat in the normal way (wash > decontaminate > polish), and then do a wipe down with Gyeon Q²M Prep to ensure that they are spotlessly clean. Next, using the supplied dropping pipette, lightly wet one of the supplied Gyeon Q²M Applicator Suedes with Gyeon Q² Mohs, wrap it around the supplied Gyeon Q²M Applicator Block, and begin wiping it evenly onto the first panel, using light pressure and overlapping strokes. You should aim to treat no more than a single panel at a time because after an initial volatilization period of 1-2 minutes you must then buff off the (still wet) residue as quickly as possible, i.e. before it begins to harden. Buffing off is best accomplished with a Buffing Towel using moderate speed and pressure in order to fully remove the residue and reveal an intense streak-free shine. Using a bright light, check the panel carefully for any smears and remove them before moving on; failure to remove smears fully can result in them hardening to the point of being impossible to remove without machine polishing, so make sure you are thorough!

After all panels are treated wait for a minimum of an hour and then apply a second coat. The car must then be left in a dry place out of direct sunlight for a minimum of 4 hours to allow these basecoat layers to harden (if you wish, you can accelerate this process by heating the treated panels to 60°C for 10 minutes using an infra-red heat lamp). Next, lightly wet one of the supplied Gyeon Q²M Applicator Suedes with Gyeon Q² Skin, wrap it around the supplied Gyeon Q²M Applicator Block, and begin wiping it evenly onto the first panel, using light pressure and overlapping strokes. You should aim to treat no more than a single panel at a time because after an initial volatilization period of 1-2 minutes you must then buff off the (still wet) residue as quickly as possible, i.e. before it begins to dry out. Buffing off is best accomplished with a Buffing Towel using moderate speed and pressure in order to fully remove the residue and reveal an intense streak-free shine. Using a bright light, check the panel carefully for any smears and remove them before moving on; failure to remove smears fully can result in them drying and out and becoming difficult to remove, so make sure you are thorough!

After all panels are treated the car must then be left in a dry place out of direct sunlight for a minimum of 12 hours to allow the coating system to harden further (if you wish, you can accelerate this process by heating the treated panels to 60°C for 10 minutes using an infra-red heat lamp). Finally, to further reduce the risk of water spots forming while it continues to cure (full curing takes around 14 days to achieve), you should apply a final topcoat of Gyeon Q²M Cure (you should also avoid washing the car with any kind of detergent for 7 days following application). Please note that you must discard all used applicators and towels after you’ve applied each coat of Gyeon Q² Mohs because it becomes extremely hard as it cures, forming a residue that has the potential to inflict severe marring or worse if applicators and towels are re-used. Furthermore, after each use, you must also replace the dropping pipette with the air-tight cap, and wash out the pipette with hot running water. Failure to follow these steps will most likely result in any leftover product setting solid in the bottle and the dropping pipette, rendering them unusable in the future.

Gyeon Syncro

Delivery Information

We have multiple delivery options

  • Next day carrier
  • 2-3 day carrier
  • Click & Collect from store

Costs

The cost of the carriage will be displayed before your final checkout. Free delivery is available for orders over £30 for the UK mainland, and £50 for Highlands and Islands.

Dispatch

  • Orders will only be dispatched and delivered on weekdays.
  • Orders for the next working day delivery must be placed before 2 pm. This gives us time to pick and pack before the carrier arrives to collect.
  • We aim to dispatch all orders within 48 hours of order receipt, Monday to Friday.
  • A despatch email will be sent when your goods leave us, if your order is delayed for any reason we will contact you.

Errors

We pride ourselves on our customer service but mistakes can happen. If you receive an incorrect or faulty item, please notify us within 30 days to arrange a refund, return or exchange. Contact Us.

Gyeon Syncro

Reviews

There are no reviews yet.

Be the first to review “GYEON Q2 Synchro 50ml Kit”

Your email address will not be published. Required fields are marked *